Guest Post by Cameron Taylor
You may have seen advertisements for air conditioner misting devices like the Mistbox flash across your Facebook newsfeed or other internet pages lately. You may have thought “Hmm…great idea! If it can make the air cooler for my outdoor unit, it will not work as hard and that means I’ll save money on my electric bill!”
I’m here to throw a wet blanket on this idea, pardon the pun. In my long HVAC career, experience has taught me that what often intuitively seems like a great idea will in reality not be so if all aspects and consequences of the idea are not carefully considered.
Let’s start with comparing a residential condensing unit (outdoor section of a house air conditioning system) misting system with a commercial HVAC cooling tower. (HVAC stands for heating, ventilation, and air conditioning – basically your furnace and air conditioner.)
These cooling towers are for a power plant, commercial building cooling towers are essentially smaller versions.
Image Credit: Wikipedia
Cooling Towers and HVAC
So what is a cooling tower? It is an evaporative cooling device used, in the HVAC realm, to reject heat from a water chiller. Chillers are essentially very large air conditioners for very large buildings like skyscrapers, malls and hospitals. Instead of cooling air like your home air conditioner does, water chillers lower the temperature of water circulating in a closed loop of piping and coils. Cold water is sent through these coils, air is blown over these same coils, and voila: dehumidified and cooled air emerges into the huge space(s)!
In short: a cooling tower provides the cooling for the liquid cooled condenser of a chiller.
This comes at a price: water is corrosive and without proper maintenance and chemical treatment, the average cooling tower can deteriorate rapidly, along with heavy scaling of the tower’s interior, which destroys its cooling ability. Scale is formed by mineral deposits that stick to a surface as water evaporates from this surface. Since this is the very heart of how a cooling tower provides cooling – evaporation – a tower’s cooling surfaces can scale up quickly if the water is not chemically treated to inhibit scale formation.
Bring the Cooling Tower Home?
The misting device wants to apply evaporative cooling to an air cooled condenser. Most residential condenser coils use only the air cooled aspect to get heat out of the house. Think of the piping and fins on this coil like the cylinder and fins on an air cooled motorcycle engine. Those fins extend the area that can get rid of engine heat to surrounding air. Every good motorcycle owner knows that keeping this part of the engine clean helps the engine run cooler and live longer.
The condenser coil was never designed with a spray of mist getting sucked into it in mind. It was designed to reject heat from the indoor evaporator at outdoor air temperatures up to a given maximum. The misting device is attempting to reduce the outdoor air temperature entering the condenser by cooling the air via evaporation (it takes heat to evaporate water, and so when this happens it uses whatever available heat is nearby).
Sounds great in principle, but in reality this misting device can scale up a heat rejection surface (the outdoor condenser coil) that was never designed to have a water mist constantly entering it. Why? Same problem as in a cooling tower: as water evaporates it leaves behind mineral deposits, which act as an insulator and reduce the ability of the condenser to get rid of heat from the house. This is like letting the motorcycle engine fins become covered with dirt and grime, which are also insulators.
But…but…they say it has a filter on it that screens out all those nasty minerals so the water won’t mess up the condenser coil fins! That’s thoughtful, but will not be enough to prevent scaling and corrosion of the fins. Why? Because that filter can never catch the airborne dust and dirt that will mix with the mist as both are sucked into the coil. When the water evaporates off the coil it will leave these minerals behind, and over time they will build up and act like insulation on surfaces that are supposed to be ideal for getting rid of heat from the house.
Water and the Damage Done
Even if it was possible to keep all minerals out of the water from all sources, the constant exposure of the fins to water over time will corrode the fins, leading to a loss of surface that can get rid of heat. The unit becomes less efficient and must work harder to do the same job – cooling a house – or can’t do the job as well, as it has been crippled.
How much damage are we speaking of? Note the result of a constant spray of water onto a commercial condensing unit because someone thought it would save money:
This coil is now missing a lot of surface area; surface area that can no longer give up heat from the building it serves. There is no way to restore this area short of replacing the coil or unit. Left to run like this, without the crutch of water mist, the unit will be expensive to operate and may result in compressor death, as compressors don’t like to run hot. The compressor is the heart of an air conditioning unit.
Objections, Your Honor!
But…but…if none of those bad things ever happen, surely these misting systems can save money, right? Not so fast. All that mist is created from water, which in most cases will come from the city tap, which must first go through a water meter. But…but…I use well water, so I’m good, right? Perhaps from the cost aspect, but that won’t exclude the risks discussed above. And well water is loaded with minerals. Oh yes we have the filter, right?
May I ask when was the last time you changed your home’s air conditioning filter? That is how often the misting device filter will likely be changed, if that often. And it still can’t catch the airborne crud, regardless of water source.
But…wait a minute! Didn’t it say above that if cooling towers are chemically treated they won’t scale up or corrode? So why not treat the water for the misting device? In truth, chemicals used for cooling towers only postpone their inevitable demise, not prevent it entirely. Scale and corrosion occur in the most carefully maintained towers. It becomes a matter of managing the rate of this deterioration to keep the tower viable until that is no longer possible.
Your home condenser misting system is not likely to be watched after with that same level of diligence; most people after installing it will simply forget it is there…until it becomes the source of a problem that is not easy to fix. Unfortunately that is so often how mechanical systems are treated, even in commercial settings…they are neglected until they break, and the loss of their operation is suddenly and painfully felt.
If Not A Mister, How Can I Reduce My Cooling Bill?
A good question that has excellent answers available! First of all, speaking as an HVAC person, maintaining your air cooled system (with no misters) is a great place to start. Change your indoor air filter on a regular basis. Have an HVAC professional clean the indoor blower wheel, indoor coil, and outdoor coil if needed.
The next steps are where Home Performance experts can help, in areas like duct and building air leakage, missing or compacted insulation, chases that conduct heat or cold throughout a house, uneven air distribution through the supply vents in the home, etc. You have to know where the real problems are before you can solve them.
All of these solutions, which do require money spent, is money well spent. The work Home Performance pros can do for a home won’t spin a water meter all summer; in fact it can drastically slow the spinning of an electric meter, and make your home really comfortable.
I understand how the misting device looks and sounds cool. It even has wifi and a smart phone app! None of these appealing features can overcome the downside, unfortunately. It also represents a stop-gap mentality found when many approach the problem of home comfort and energy efficiency.
Stop-gap thinking seldom leads to sustainable, satisfactory solutions.
My verdict? Pass on this device and consider a longer view, one that those in the Home Performance field are trained and ready to provide for you.
About the Author
Cameron Taylor has been employed in the HVAC, plant engineering, and related building trades for over 35 years. He currently serves as the energy management control system supervisor for the University of Texas at Arlington. He holds an associates degree in HVAC technology, and is a certificate member (CM) of the Refrigeration Service Engineers Society (RSES). He is also a member of the American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE).
In his spare time, Cameron serves as adjunct instructor at Tarrant County College in Fort Worth, Texas, teaching HVAC residential system design and psychrometric principles to the next generation of HVAC technicians and business owners. He shares a mutual interest in building science with those who manage a full time career in that discipline, as HVAC systems and building enclosures are one complete system.
My friend Cameron Taylor is a first class HVAC expert and educator. His specialty is large commercial systems, but he has been using his home as a test bed for Home Performance solutions, which is how we connected. In his last job he ran the HVAC system for the Amon Carter Museum of American Art in Fort Worth, Texas. It makes me think of the Thomas Crown Affair theft where the AC was shut off and the infrared cameras could no longer see humans. I admit, this is part of why I like Cameron.
Thanks to Kickstarter and similar venues, there have been a number of ‘quick fix’ products for comfort problems in homes recently such as Mistbox, and ‘smart vent’ technologies like EcoVent and Keen Home. To the uneducated, they seem like a great idea. To Building Scientists like myself and Cameron, we see the substantial long term problems attached to them.
Buyer beware of these products, if they cause you thousands of dollars in problems down the road, we tried to warn you. Neither of us is a fan of silly scare tactics, we will only raise alarms when we think it’s justified.
We’ve found that if you truly want to solve problems in your home like rooms or floors being 5-15 degrees different in temperature, you have to attack the root of the problem, not symptoms.
It’s kind of like trying to lose weight with diet pills – have you ever seen it work? There have always been two secrets to losing weight: diet and exercise. In a home, it’s reducing heat leakage through air sealing and insulation, then installing the right furnace and air conditioner to provide excellent comfort. Substantial energy savings typically accompany those upgrades. There are no shortcuts.
Speaking of energy savings, depending on the climate, they may not be substantial. Cameron lives in Texas, so they spend a fair amount of money on cooling. Here in Cleveland, few homes spend more than $300/year on cooling. Before you get enamored with quick fixes, be sure to do some quick math.
If you really want to save money and solve problems in your home, it starts with diagnosis and planning. Get an energy audit to begin to understand where the problems in your home are. A good independent energy auditor will be able to help you make a plan to solve them, then make sure the solutions are well installed so they actually work. Cameron and I are in the solutions business. We like things that work. Everything else is just noise.
EcoVent: Treating the Symptoms Rather Than The Disease – Energy Smart’s thoughts on EcoVent (and Keen Home).
Energy Vanguard: Is Evaporative Cooling the Answer to High Air Conditioning Costs? – My friend Allison Bailes breaks down the MistBox pros and cons.
Are Smart Vents Safe – Lloyd Alter – Another good review of smart vent technology.
Energy Vanguard: Can You Save Money By Closing Vents In Unused Rooms? – A good look at the consequences of this seemingly benign practice.
Diagnosing Problems with a Smart Thermostat – Using an Ecobee thermostat to discover problems.
Solving for Comfort with A Smart Thermostat – Journal of Light Construction – NOTE: Behind a paywall. This was Cameron and I’s first collaboration, based on the article just above.
Get the HVAC Guide
It’s free! Make buying a new furnace, air conditioner, or heat pump less stressful.
Success! Look for an email from me (Nate Adams) to download the guide.
There was an error submitting your subscription. Please try again.
Google Nest Hub Max Smart Home Assistant (Chalk, Refurbished, Plain Box) – EXPANSYS Japan
Best Amazon Prime Day Arlo, Nest, Ring, Blink & Smart Home Deals 2020: Top Security Camera, Video Doorbell, Floodlight, Alarm & Philips Hue Sales Presented by Deal Tomato
Prime Day smart home & security camera deals for 2020 are finally here, browse all the latest Prime Day Ring Video Doorbell, Nest Protect & Thermostat, Philips Hue smart LED bulb, Arlo Pro & Blink Mini sales listed belowPrime Day home secur…
Which Smart Home Heating Should You Choose?
Not all smart heating control systems are suited for every lifestyle and home, with some more and less beneficial than others. SMART stands for ‘Self-Monitoring Analysis & Reporting Technology’, and differs from standard heating controls by allowing you to control every aspect of your heating schedule from either a phone or tablet. Although room thermostats and timers allow you to control each room instead of your whole home, as long as you have internet access, smart home heating devices let you control your heating from your phone, no matter where you are in the world.
Today, we’re running through 7 of the best smart heating thermostats and systems, comparing features, benefits and what type of home they’re most suitable for.
– 7 day, & 5/2 day scheduling with a pre-configured schedule included
– Choice of up to 4 time periods a day
– Minimum On-Time & Cycle Rate settings ensuring compatibility with many boilers
– Table stand for ease of positioning
– Alert messages to assist fault-finding with a fail-safe mode
– Wireless technology makes upgrading easier and the installation time shorter with less wiring involved
– Homes that require high levels of automatic control that provide significant energy efficiency for a wide range of boilers and systems.
– Single Heating Zone Control
– 7 Day, 5/2 Day, or 24 Hour Control
– Programmable Room Thermostat
– Easily Programmed With The Associated App
– Homes that are just starting to take the first steps into using smart home heating
– Homes that need a single heating zone control
– Homes that have either combination or standard boiler systems
– Touch-screen interface simplifies scheduling, changing and overriding temperature
– Location-based programming (geo-fencing) adds an automated layer of control, adjusting the customer’s home heating based on their location
– Scheduling features include 7 and 5/2 day bespoke scheduling with up to 6 time periods a day
– Simple flip-up wiring bar for easy access and an easy-to-install boiler or zone valve interface
– Direct wall mounting or wall-box mounting
– Optimisation features include optimum start and stop & delayed start boiler control. Allows the thermostat and boiler to work more efficiently together
– Homes with any boiler and almost every heating system
– Homes with 230V on/off OpenTherm appliances (gas boilers, combi boilers and heat pumps)
– Ability to control water temperature and heating
– Self-learning functions to make every experience a unique one, helping it to understand your home’s needs
– Using a smart weather compensation feature and weather data, the vSMART can tell your boiler how hard it has to work to get your home to your required temperature
– You can connect multiple vSMART controllers to one app
– Homes with Valliant ecoTEC system/open vented boilers
– Households that want to be able to control water temperature from anywhere too
– A 7-day full programmer that gives great flexibility offering up to three on/off switchings per day
– LoT display, providing text feedback that gives help and programming hints
– Automatic Summer/Winter 1 hour time change
– Choice of 3 different built-in programmes
– ‘Holiday’ button
– Homes with heating and stored hot water in complete systems
– Homes with older gravity circulation stored hot water systems, where there’s no interlocking control valve
– Households with different heating needs from day-to-day
– One channel thermostat system with two radiator thermostats to start zoning your system
– Smart heating & hot water control
– Quick & simple to install using an industry-standard backplate
– Easy Zoning with the addition of extra Wiser Radiator Thermostats
– Homes with combination boilers
– Households that want to start a zoned system to control individual zones within the home
– Automatic time and temperature control of domestic heating premises
– Optimum Start, Optimum Stop and Delayed Start
– No installer links or switches on the back of the unit means no adjustment is required for combi boilers and most central heating systems
– Scheduled maintenance alert
– Automatic Summer/Winter time change
– Up to four independent time & temperature settings
– Auto, manual, holiday, override and off (frost) modes
– Domestic premises
– Most central heating systems and combi boilers
For more smart home heating controls, check out our full range today at MonsterPlumb. If you’re not interested in smart technology when it comes to controlling the heating and water temperature in your home, take a look at our selection of heating controls and valves.
IoT3 months ago
Smart Home Tech: What are the best smart thermostat options?
Home Security2 months ago
Getting Past Cybersecurity In IoT Devices And Exploring Their Performance | The Cyber Security Place
IoT2 months ago
Building Solar Energy Monitoring Systems Using IoT – floLIVE
Smart Gadgets2 months ago
VW explains how the ID.4 electric SUV gets smart about coasting
IoT2 months ago
Enerman’s Vision Is To “Provide Innovative Solutions To Save Energy And Reduce Carbon Footprint, Digitize Every PV Plant And Make It IOT Ready” In The Solar Renewable Space.
Home Security2 months ago
Boundary Launch DIY Z-Wave Smart Home Security System – Automated Home
Smart Gadgets2 months ago
China’s Tesla rival Xpeng sets sights on Europe as it delivers first batch of smart electric cars to Norway | South China Morning Post
IoT2 months ago
Purina to take guesswork out of pet nutrition with IoT ‘smart bowl’ – Smart City